- Frequency Range: 150 kHz to 30 MHz
- For disturbance measurements on a single, unshielded, balanced pair
- Provided with Cat. 3 & Cat. 5 LCL Adapters
- Circuit concept per figure D.1 of EN 55022: 2010+AC:2011 (CISPR 22: 2008, Edition 6.0)
- Meets applicable requirements of EN 55022: 2010+AC:2011 (CISPR 22: 2008, Edition 6.0) and CISPR 16-1-2: 2014, Edition 2.0
ISN-T2
ISN for Conducted Emissions from Telecom
The Com-Power ISN T2 is used for common-mode disturbance voltage measurements on ports with a single, unshielded, balanced pair for Cat. 3 or Cat. 5 cabled networks. The RF input/output port is a 50Ω female BNC connector, located on the top of the ISN. The ISN is equipped with D-sub 25 pin female connectors located on the front and rear panels for connection to the LCL and connecting adapter, respectively
Features
Key capabilities and advantages
Specification
Technical specifications and parameters
| Product Name | Impedance Stabilization Network (ISN) |
| Specifications | EN 55022 (CISPR 22), CISPR 16-1-2 |
| Frequency Range | 150 kHz to 30 MHz |
| Line Parameters | (1) unshielded balanced pair |
| Voltage Rating (EUT/AE Port) | 50 VDC / 32 VAC (line to ground @ 50/60 Hz) |
| Current Rating (EUT/AE Port) | 800 mA (per line), 1.6 Amps (per pair) |
| Transmission Bandwidth (wanted signal) | 100 MHz |
| Impedance/Phase (150 kHz to 30 MHz) | 150O |
Other Product
Chat Us