Background Image

TBS12B

Battery powered LoRaWAN RTU for SDI-12 sensors

TBS12B is a battery powered outdoor RTU fully LoRaWAN 1.02 compliant. It has been designed to cope with applications where SDI-12 maximum range is a limitation by leveraging the long range capability of LoRa. TBS12B is delivered within its IP67 rated aluminium die cast housing along with a fixture to tie it to a pole. Its connector allows plugging directly one SDI-12 sensor or a junction box would multiple SDI-12 sensors need to be locally deployed. The embedded LoRa modem supports both low (433/470MHz) and high (868/915MHz) LoRa radio bands, which makes TBS12B suitable to be used anywhere without having to replace the RF board. With a limiting threshold of +11dBm and a flat frequency response from 9 kHz to 600 MHz, the TBS12B limiter can be used as protective device for the complete range of conducted noise measurements and in many other applications.

  • Compatible with SDI-12 v1.3 compliant sensors.
  • Supports all regional bands as defined in LoRaWAN 1.02 regional parameters specification.
  • ABP / OTAA.
  • ACK / REPEAT features.
  • Configurable frequencies and data rates.
  • EUI and ciphering keys.
  • PC application to configure the platform (UART).
  • Configurable measurement and transmission intervals; timing alignment and time zone support.
  • Up to 16 SDI-12 commands can be programmed.
  • Batteries: 3*1.5V DCELL.
  • Low quiescent current: 5-7ยตA.
  • Operating temperature: -40; +85 ยฐC.
Have any Questions?