LI-220C
LI-220C

No image available.

LI-220C

9 kHz to 30 MHzCISPR 16-1-2 / ANSI C63.4250 & 50 microhenry / 20 Amps

The LI-220C Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products. The LI-220C is compliant with both CISPR 16-1-2 and ANSI C63.4. The LISN provides defined stable impedance and isolates the EUT from power source influences, thereby providing accurate and repeatable results. The LI-220C includes one pair of single-conductor networks, housed together, to be installed in series with each current-carrying conductor in a single- phase, dual-phase or DC power system. A second LI-220C pair can be used to accommodate 3-phase power systems (Wye or Delta configurations). This LISN uses air-core inductors to prevent saturation and permeability variation.

  • Frequency range of 9 kHz to 30 MHz.
  • Fully compliant with CISPR 16-1-2 / ANSI C63.4.
  • β€œAir-core” inductors to prevent saturation.
  • Individual Calibration Included.
  • Three-Year Warranty.
  • Product Name: Line Impedance Stabilization Network (LISN).
  • Specification: CISPR 16-1-2 / ANSI C63.4.
  • Application: Power Line conducted emission tests.
  • Frequency Range: 9 KHz - 30 MHz.
  • RF Connector: 50 Ohms N-type (female).
  • Current Rating: 20 Amperes AC, 14 Amperes DC.
  • Voltage Rating: 270 VAC (Line to Ground), 380 VDC.
  • Inductors: 250 & 50 microhenry (air-core).
  • Mains & EUT Connections: IEC 60320, C-20 @Mains and Universal multi-configuration @EUT.
  • Dimensions (each network): 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cm.
  • Weight (each network): 20.5 lbs / 9.3 kg.
  • Insertion Loss: 6 dB to 1 dB (9 kHz to 15 kHz), Decreasing linearly with log of frequency < 1dB (15 kHz to 30 MHz).
  • Isolation: 20 dB to 40 dB (9kHz to 50 kHz), Increasing linearly with log of frequency >50 dB ( 50 kHz to 30 MHz).
Chart Image
Have any Questions?