Anritsu - PT Unitronic Jaya

MG362X1A

RF/Microwave Signal Generator

Rubidium MG362x1A offers atomic clock frequency stability with an internal rubidium frequency reference option. Alternatively, customers can also get exceptional frequency stability by calibrating an internal oven controlled crystal oscillator (OCXO) reference with an external GNSS/GPS signal. The exceptional frequency stability makes Rubidium an ideal signal generator for Metrology and high speed clock applications.

Very low phase noise, close in and far out
Atomic clock frequency stability and accuracy
Onsite level and frequency calibration
Very low harmonic and spurious
Quad pulse signal generation and pulse sweep

Frequency : 9 kHz to 20/43.5 GHz/70 GHz Operable up to 72 GHz.
Frequency Resolution : 0.001 Hz.
Phase Offset : Adjustable in 0.1 degree steps.
SSB phase noise : -136 dBc/Hz (typ) and -140 dBc/Hz (measured) @ 10 GHz output, 10 kHz offset.
Internal time base stability - Aging : < ±2 x 10E-8 per year with Option 3 < ±1 x 10E-9 per year with Option 56.
Reference frequency input/output : Reference frequency input/output.
Harmonics (20/43.5/70 GHz) : -58 dBc (MG36221A) / -55 dBc (MG36241A and MG36271A).
Sub Harmonics : -83 dBc (MG36221A and MG36241A) / -63 dBc (MG36271A).
Non-harmonics (20/43.5/70 GHz) : -63 dBc.
Pulse modulation : min pulse width : < 50 ns (unleveled).
Pulse modulation : Rise/Fall times 5 ns (typical).
LF signal Generator waveforms : Sine, square, pulse, triangle, ramp, GN/UN noise.
Frequency sweep modes : Step, List, Analog (MG36221A and MG36241A only).
Frequency sweep width : 9 kHz to full frequency range (step, list) 100 MHz to full frequency range (analog).
Power sweep : Step and List.
Power sweep resolution : 0.01 dB/step.

Have any Questions?

Datasheet Manual Email Us