PLZ-4W Series

PLZ-4W Series

Multifunctional DC Electronic Load (CC/CV/CR/CP/Zero volt input) : 6 Models

The PLZ-4W Series Electronic Load unit is a multifunctional system designed to offer the highest levels of reliability and safety with operation function of constant voltage, constant current, constant power and constant resistance mode. And its control unit comes with GPIB, RS232C and USB as standard equipment, available in 5 models.

Outline

A 0(Zero)V input operating voltage is available in 2 models (PLZ164WA, PLZ664WA) which are suitable to meet the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices required for the lower operating voltage application. Model PLZ664WA offers the 132A at 0V input as a largest current rating in its class. ( 33A for model PLZ164WA) Furthermore, the PLZ-4W features high speed slew rate when switching, it can be used as simulating load for the characteristic, performance, life cycle, aging test in the field of application in Automobile electronics, SW Power Supply manufacturer, Secondary Battery. To achieve large capacity for testing application at low cost, PLZ1004W can be expanded up to 9kW by using its 2kW booster unit (PLZ2004WB).

Features

  • -   USB 2.0 compatible
  • -   Can be used with Windows Vista/XP/2000.
  • -   Operates using bus power. Requires no AC adapter.
  • -   Bus power operation. No AC adapter required.
  • -   Allows read-back of output values and status monitoring.
  • -   Can control up to 32(*1) DC power supplies that equip TP-BUS(*2).
        (Different power supply models can be combined.)
        TP-BUS connection can be extended up to 200 m. Ideal for remote monitoring !

    • Lineup

    Model Specification Manual
    PLZ164W DC Electronic Load (E-Load), 1.5 to 150V, 33A, 165W , Rise time: 10 µ second(which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
    		 Manual
    PLZ334W DC Electronic Load (E-Load), 1.5 to 150V, 66A, 330W , Rise time: 10 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
    		 Manual
    PLZ1004W DC Electronic Load (E-Load), 1.5 to 150V, 200A, 1000W , Rise time: 10 µs (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)
    		 Manual
    PLZ2004WB 2000W booster unit for model PLZ1004W dc electronic load (E-Load). Using 1 PLZ1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) *PLZ2004WB can be used for the PLZ1004W only. It cannot be connected and used with any other model.
    		Manual

    Have a Any Question?

    Datasheet

    Email Us